Engineering Approach
The Machine
Comes First.
The Lubricant
Comes Next.
Industrial lubrication is rarely just a question of selecting a grease or oil. A bearing in a continuous caster faces a very different operating environment from a work-roll bearing, cement kiln girth gear, automotive actuator or textile stenter chain. Temperature is only one part of the problem. Load, speed, water, dust, vibration, chemical exposure, lubrication method and relubrication interval can all influence lubricant selection.
For more than 25 years, Project Sales Corp has worked with industrial maintenance and engineering teams in India on specialty lubrication applications. Today, PSC brings that application-led approach to LUBCHEM Korea specialty lubricants in India.
How to use this guide
Find your industry
Steel · Cement · Automotive · Textile · Other Industrial Equipment
Find the machine or component
Caster · Bearing · Gear · Kiln · Roller · Chain · Actuator · Joint · Guideway
Identify the operating challenge
Heat · Water · Heavy Load · Shock · Dust · Speed · Corrosion · Long Lubrication Interval
Review the documented LUBCHEM application
Each section maps operating conditions to verified grades from Lubchem technical application literature.
Ask PSC to verify before changing lubricant
Send us the machine, operating conditions and existing lubricant. We start there.
Product recommendations in this guide are based on documented LUBCHEM application information and should be reviewed against actual equipment and operating conditions before lubricant substitution. References to an equipment type or application do not by themselves constitute OEM approval.
Show us
the application.Not just
the lubricant.
You do not need to know the LUBCHEM product number. Send PSC the machine, the problem, or a photograph. We start there.
Send PSC
Lubrication Point
Current Lubricant
Operating Problem
Photograph or TDS
Already know the product?
Send us simply:
LUBCHEM + Product Code
+ Quantity + Delivery Location
Specialty Lubrication Across
the Steelmaking Process
A steel plant contains radically different lubrication environments — from slow-moving, heavily loaded raw-material equipment to water-exposed continuous casters and high-speed rolling mills.
What changes across the plant
Lubchem steel application literature
Lubchem's steel-industry literature specifically addresses high temperatures, corrosive process fluids, abrasive contamination and shock loads. Application mappings come from both its metallurgical application guide and newer industrial catalogue.
One steel plant.
Hundreds of lubrication points.No single lubricant answer.
PSC Application Check
+ current lubricant
+ relubrication interval
Raw Material Handling
Where Steelmaking Begins
Raw-material equipment operates continuously in dust, contamination, vibration and heavy loading. Lubricant retention and protection of bearing and gear surfaces are critical.
Lubrication Points — Source: Lubchem Metallurgical Application Literature
| Equipment | Lubrication Point | LUBCHEM |
|---|---|---|
| Stacker / Reclaimer | Slew-ring bearing — high load, slow speed | BE 2102 G |
| Stacker / Reclaimer | Slew-ring gear | BE 2102 G |
| Conveyor | Drive/return cylinder rolling bearings | HB 3101 EP |
| Vibrating Screen | Eccentric-shaft rolling bearing | HB 3101 P |
| Grinding Mill | Rolling bearings | BE 2181 |
| Grinding Mill | Open-gear drive | EO 210 G Series |
Source: Lubchem Korea metallurgical application literature. Product codes appear against specific lubrication points as documented in that source.
Application Focus — BE 2102 G
Heavy load · Slow speed · Water resistance · Bearing protection. The newer Lubchem catalogue additionally identifies BE 2102 G for work-roll and extreme-pressure bearing applications, so this product crosses several important steel applications.
BE 2102 G
EP Bearing Grease
BE 2181
Bearing Grease
Application Review
Send us equipment + bearing/gear + current lubricant + relubrication interval
Coke, Lime & Sinter
Heat, Dust, Load and Exposed Mechanisms
Coke Oven
| Application | LUBCHEM |
|---|---|
| Reversible gas valve — Coke oven battery | HB 3101 EP |
| Pusher & guide machines — rack rail | EO 2107 G |
| Precipitator hammer rolling bearings | BE 210 G Series |
| Rotor / high-speed bearing applications | BH 6042 |
| High-temperature bearing applications | HB 3101 S |
Lime / Rotary Kiln
| Application | LUBCHEM |
|---|---|
| Open gear | EO 210 G Series |
| Internal riding ring | HM 9059 GM |
| Support and thrust rollers | Application review — oil or grease arrangement dependent |
Sinter
| Application | LUBCHEM |
|---|---|
| Rotary mixer open gear | EO 2100 G |
| Sinter-machine trolley-wheel roller bearings | BE 2181 |
| Sinter-machine slide tracks | HP 3101/2 |
Source: Lubchem Korea metallurgical application literature.
Heat. Dust.
Load. Exposed
mechanisms.Each one a different
lubrication problem.
Sinter / Pellet Review
and existing lubricant
See also: Rotary kiln girth gear → Page 14
Kiln riding ring → HM 9059 GM · Page 16
Blast Furnace & Steelmaking
Lubricating Equipment Around Extreme Heat
These pages address lubrication points on equipment operating near or around extreme process heat — not lubrication of the process itself. Lubricant selection accounts for operating temperature, lubrication arrangement and the specific component.
Blast Furnace Area — Documented Lubrication Points
Lubchem's steel application guide identifies lubrication requirements for the following equipment areas. Product selection varies by operating temperature and lubrication arrangement.
The guide differentiates lubricant selection according to operating temperature and lubrication arrangement, including GM S Series, GH Series and HP-series products. Contact PSC for application-specific selection.
Steelmaking
Application principle
The closer equipment gets to the process, the more important application-specific lubricant selection becomes.
PSC Application Check
Existing lubricant
Continuous Casting
Heat + Water + Slow Rotation
Lubchem describes the caster environment as involving slow rotation, high temperatures and corrosive process-water ingress. Its technical approach emphasises sealing, water resistance, surface affinity, wear protection and keeping abrasive contamination away from bearing contacts.
Continuous casting is not
one lubrication application.Select by component
and operating condition.
Different lubrication points can face different combinations of heat, water, speed, load and movement.
Lubrication Points — Source: Lubchem Korea Application Literature
| Equipment | Lubrication Point | LUBCHEM |
|---|---|---|
| General caster bearings | Rolling bearings — continuous casting equipment | HB 3101 P |
| Other caster points | Specific points including wet segments, extractor, run-out | Application review required — varies by point and system |
The newer Lubchem catalogue specifically identifies HB 3101 P for continuous casting equipment, conveyor rollers and high-temperature joints. Individual caster lubrication points should be reviewed against the installed lubrication system and operating conditions before lubricant selection.
Centralised lubrication matters
A technically suitable grease must also be capable of reaching the bearing reliably through the installed lubrication system. Pumpability is as important as performance at the bearing.
Application Review
Review your caster grease with PSC
HB 3101 P
Industrial Bearing Grease
Also documented for
Conveyor rollers
High-temperature joints
Vibrating screen bearings
Coke-oven gas valve
Source: LUBCHEM Korea application literature
See also: Work-roll bearings → BE 2102 G · Page 8
Hot Rolling Mill
Water, Shock Loads and Higher Speeds
Hot rolling creates a different lubrication problem from continuous casting. Lubchem's steel guide notes the combination of high temperatures and process-water ingress, but with generally higher rotational speeds and shock loading. It emphasises surface separation, corrosion protection and sealing ability.
Key Applications — Source: Lubchem Korea Catalogue
| Equipment / Component | Application | LUBCHEM |
|---|---|---|
| Work / Backup Rolls | Work-roll bearing · Extreme-pressure bearing | BE 2102 G |
| Rolling-Mill Drive Shafts | Toothed couplings | Application review required |
| Cardan Shafts | — | Application review required |
| Transport / Run-Out Tables | Rolling bearings | Application review required |
| Drive and auxiliary bearings | — | Application review required |
BE 2102 G is explicitly documented in the newer Lubchem industrial catalogue for work-roll bearings and extreme-pressure bearing applications. Other hot-rolling applications require PSC application review.
Water + Load +
Shock + SpeedReview these four factors
together when selecting
rolling-mill bearing grease.
BE 2102 G
EP Bearing Grease
Rolling Mill Review
Bearing type · Speed
Water exposure
Existing lubricant
See also: Slew-ring / heavy-load bearings → BE 2102 G · Page 4
Cold Rolling & Finishing
Higher Speed. Different Chemistry.
Cold rolling removes some of the thermal severity of hot rolling but introduces higher rotational speeds and chemically active rolling-mill emulsions. Lubchem's metallurgical guide highlights chemical resistance, sealing performance and careful base-oil / viscosity selection to control heat generation and premature lubricant degradation.
Cold Rolling Mill
Product selection for cold-rolling applications requires application review. Speed, emulsion chemistry and bearing arrangement all influence grade selection. Contact PSC with machine details.
Galvanizing / Finishing
Finishing-section oven roller bearing applications require application review for operating temperature and chemistry.
Before changing a cold-rolling lubricant
Send PSC: Grease or oil · Manual or centralised · Bearing type · Speed · Operating temperature · Water / emulsion exposure · Relubrication interval. These seven details are the minimum needed for a meaningful application review.
Same rolling mill.
Different speed.Different lubricant
selection criteria.
Hot and cold rolling environments are not interchangeable lubrication problems.
Cold Rolling Review
Emulsion chemistry
Bearing arrangement
Existing lubricant
LUBCHEM Steel Application Selector
| Application | LUBCHEM Grade | Source |
|---|---|---|
| Stacker/reclaimer slew bearing | BE 2102 G | Metallurgical guide |
| Stacker/reclaimer slew gear | BE 2102 G | Metallurgical guide |
| Conveyor bearings | HB 3101 EP | Metallurgical guide |
| Vibrating-screen bearings | HB 3101 P | Metallurgical guide |
| Grinding-mill bearings | BE 2181 | Metallurgical guide |
| Grinding-mill open gear | EO 210 G Series | Metallurgical guide |
| Coke-oven reversible gas valve | HB 3101 EP | Metallurgical guide |
| Pusher/guide rack rail | EO 2107 G | Metallurgical guide |
| High-speed bearing applications | BH 6042 | Metallurgical guide |
| High-temperature bearing applications | HB 3101 S | Metallurgical guide |
| Rotary-kiln open gear | EO 210 G Series | Metallurgical guide |
| Kiln internal riding ring | HM 9059 GM | Metallurgical guide |
| Sinter rotary-mixer open gear | EO 2100 G | Metallurgical guide |
| Sinter trolley-wheel bearings | BE 2181 | Metallurgical guide |
| Sinter slide tracks | HP 3101/2 | Metallurgical guide |
| Continuous casting equipment bearings | HB 3101 P | Industrial catalogue |
| Work-roll / EP bearings | BE 2102 G | Industrial catalogue |
| High-load rotation | WS 3190 M | Industrial catalogue |
| High-speed rotation | PH 4012 | Industrial catalogue |
| Pellet-press bearings & gears | KR 6102 EP | Industrial catalogue |
Don't see your application?
Machine / OEM / Model / Component / Existing Lubricant / Problem / Quantity
PSC Contact
Project Sales Corp
LUBCHEM Korea Specialty Lubricants — India
projectsalescorp.com
Specialty Lubrication Across
the Cement Process
Cement production combines several difficult lubrication conditions in one plant. The Lubchem cement application material maps lubricants against individual machines and lubrication points rather than treating the plant as one environment.
Operating challenges
Selection approach
Follow the process. Find the machine. Then select the lubricant. The Lubchem cement application material identifies specific grades for specific machines. Where a product is not explicitly documented, PSC will conduct an application review rather than extrapolate from a similar application.
Follow the process.
Find the machine.Then select
the lubricant.
Cement Plant Enquiry
Lubrication point
Existing product · Consumption
Operating problem
Crushing & Raw Material Preparation
Dust, Shock and Heavy Loads
This section covers the front end of the plant where heavy loading, vibration and contaminated operating conditions are the dominant lubrication challenges.
Crusher
Large crusher bearings require protection under heavy loading, vibration and contaminated operating conditions.
BE 6181 MG
Heavy-Load Bearing Grease
Source: Lubchem cement application literature.
Raw-Material Handling
Where the cement source does not explicitly map a product to a specific machine, PSC will conduct an application review. Product codes from the steel section should not be assumed equivalent for cement equipment without verification.
What PSC needs
Bearing type · Speed · Temperature · Load · Dust exposure · Current grease · Relubrication interval
Heavy load.
Dust. Shock.Lubricant retention
is the priority.
Crusher / Front-End Review
Bearing designation
Current grease
Operating temperature
See also: Roller press → BE 6181 MG · Page 18
Raw Mill & Vertical Mill
Lubricating the Grinding Process
Grinding equipment combines heavy loads with contamination, vibration and extended operating periods. Three distinct lubrication zones require separate consideration.
Mill Bearings
High-load bearing applications. Product selection requires application review against bearing arrangement, operating temperature and lubrication system.
Application review required
Contact PSC with mill manufacturer, model, lubrication point and operating conditions.
Mill Drive
Gearbox and drive-system lubrication. Oil-lubricated arrangements require viscosity selection against operating temperature and drive power.
Application review required
Contact PSC with drive OEM, gear type and thermal data.
Exposed / Open Gearing
Where applicable, open gearing requires a lubricant capable of maintaining a protective film under high tooth contact loads. See also Pages 14–15 (Rotary Kiln / Girth Gear) and Page 19 (Cement Plant Open Gears).
Before changing a mill lubricant
Send PSC: Mill manufacturer / Model / Lubrication point / Current lubricant / Operating temperature / Consumption / Oil or grease analysis if available
Three zones.
Three different
lubrication problems.Mill bearing.
Drive. Open gear.
Rotary Kiln
One Kiln. Several Completely Different Lubrication Problems.
A kiln may contain girth gear & pinion, tyre / riding ring, support rollers, thrust rollers, and drive bearings. These must not be treated as one lubrication application.
Girth Gear — Source: Lubchem Cement Application Literature
01
Priming
EO 2101 GA
Preparation and contact-pattern work on tooth surfaces
02
Running-In
EO 2107 GB
Controlled running-in or corrective treatment
03
Operation
EO 2100 GC
Ongoing open-gear lubrication during normal operation
Riding Ring / Kiln Tyre
HM 9059 GM
Kiln Tyre / Riding Ring
Critical distinction
The lubricant used between tyre and shell is not the lubricant used on the girth gear. These are separate lubrication points with different requirements.
Other Kiln Points
Support and thrust roller product selection depends upon the actual bearing arrangement and operating temperature. See Page 17 for the full decision approach.
Application Review
Send PSC your kiln arrangement and existing lubricants
Girth gear detail → Page 15 · Kiln tyre detail → Page 16
Girth Gear Lubrication
A Girth Gear Has a Life Cycle
Rather than selecting one open-gear lubricant for all conditions, Lubchem's open-gear family includes distinct products for different stages of gear operation. The stage of the gear's life — not just the application — determines the correct product.
01
Priming / Preparation
EO 2101 GA
Used during preparation and initial treatment of tooth surfaces and for evaluating the contact pattern.
02
Running-In / Corrective
EO 2107 GB
Used where controlled running-in or corrective treatment of tooth surfaces is required.
03
Normal Operation
EO 2100 GC
For ongoing open-gear lubrication during normal operational conditions.
Open Gear Review — Send PSC
Pinion details
Drive power
Spray / dip / manual application
Existing lubricant
Consumption
Photographs of tooth flanks
Contact pattern if available
A girth gear
has a life cycle.Three stages.
Three lubricants.
Photographs of tooth flanks tell us considerably more than an enquiry reading simply: "Please quote open gear grease."
Kiln Tyre & Riding Ring
Lubrication Where Movement Is Small but Conditions Are Severe
A kiln tyre and shell do not behave as one completely rigid assembly. Relative movement can occur as the kiln rotates and changes thermally. The lubrication requirement therefore differs substantially from conventional bearing or open-gear lubrication.
HM 9059 GM
Kiln Tyre / Internal Riding Ring
Relative movement occurs during rotation and thermal cycling. This lubrication interface requires a product selected specifically for this duty.
Do not substitute open-gear lubricant
The girth gear and riding ring are separate lubrication points. HM 9059 GM is the documented Lubchem product for the kiln tyre / riding ring application. Open-gear products (EO series) are for the girth gear only.
Application Review
Send PSC your kiln tyre arrangement and existing lubricant
Same kiln.
Different points.Different
lubricants.
Girth gear, riding ring and support rollers each face different lubrication conditions and require separate product selection.
Girth gear → EO series · Pages 14–15
Support rollers → Page 17
Support & Thrust Rollers
Carrying the Kiln
Support and thrust rollers operate under substantial mechanical loading. Lubchem's industrial application literature distinguishes between oil-lubricated and grease-lubricated bearing arrangements rather than prescribing one product universally. The correct product family depends on the actual arrangement.
Product Families — Source: Lubchem Industrial Application Literature
| Arrangement | LUBCHEM Family |
|---|---|
| Oil-lubricated bearing arrangements | GM / GH Series |
| Grease-lubricated bearing arrangements | BE Series |
Specific grade within each family is selected against operating temperature, viscosity requirement and bearing arrangement. Contact PSC with full details.
Selection approach
Never select solely from the equipment name
Support roller and thrust roller bearing arrangements vary between installations. The arrangement — not just the machine name — determines the product family.
Oil or grease?That question
comes before
the product name.
Support and thrust roller bearing arrangements are not uniform. Lubchem documents separate product families for oil-lubricated and grease-lubricated arrangements.
Roller Application Review
Bearing arrangement
Operating temperature
Existing lubricant
Kiln OEM / model
See also: Kiln girth gear → Pages 14–15
Riding ring → HM 9059 GM · Page 16
Roller Press / PGR
Extreme Loads at the Grinding Interface
Roller press bearing applications in the cement industry represent a demanding combination of high bearing loads, shock loading, contamination and continuous operation. Lubricant retention and compatibility with the installed lubrication system are important considerations alongside the grease's performance characteristics.
BE 6181 MG
Heavy-Load Bearing Grease
Why roller press applications require separate treatment
No numerical performance claims are made beyond what is documented in the product TDS. For application-specific data, contact PSC.
High load.
Shock.
Continuous.Lubricant selection
must account for
all three.
Roller Press Review — Send PSC
Bearing designation
Grease quantity
Lubrication system
Current product
Relubrication rate
Bearing temperature
Application Review
Review your roller-press grease with PSC
See also: Crusher → BE 6181 MG · Page 12
Cement Plant Open Gears
Not Every Open Gear Has the Same Requirement
Open gear applications in a cement plant extend beyond the rotary kiln. Ball mills, raw mills, coal mills and other large slow-speed drives may have similar requirements, but product selection still depends upon the stage of operation.
Potential open-gear applications
Lubchem Open-Gear Family — Source: Cement Application Literature
01
Priming
EO 2101 GA
02
Running-In / Corrective
EO 2107 GB
03
Operational
EO 2100 GC
Product selection depends upon whether the application is priming, running-in, corrective treatment or normal operation — not just on the machine name.
Send us
the gear teeth.Not just
"quote open
gear grease."
Photographs of tooth flanks tell us considerably more than a product enquiry alone.
Send PSC the Gear
Pinion photograph
Drive side tooth flank
Non-drive side tooth flank
Existing lubricant
Drive power · Application type
Kiln girth gear detail → Page 15
LUBCHEM Cement Application Quick Reference
| Application | LUBCHEM Family / Product |
|---|---|
| Heavy-load crusher / bearing applications | BE 6181 MG |
| Open gear — priming / preparation | EO 2101 GA |
| Open gear — running-in / corrective | EO 2107 GB |
| Open gear — operational lubrication | EO 2100 GC |
| Kiln tyre / internal riding ring | HM 9059 GM |
| Oil-lubricated support / thrust arrangements | GM / GH Series — application dependent |
| Heavy-load grease-lubricated bearings | BE Series — application dependent |
| High-load slow-speed bearing / gear applications | BE 2102 G — where documented / verified |
| Centralised lubrication points | Product selected according to system + application |
What are you using today?
Klüber? FUCHS? Mobil? Shell? Castrol? SKF? Other?
Send PSC the exact product name or TDS.
We will review the application against available LUBCHEM Korea products.
PSC does not claim interchangeability or equivalence solely from a competitor product name. Final selection requires application review.
Cement Plant Enquiry
Plant / Equipment / OEM
Lubrication Point
Existing Product
Consumption
Operating Problem
PSC Contact
Project Sales Corp
LUBCHEM Korea — India
Specialty Lubrication Inside the Vehicle
Automotive lubrication often involves small quantities performing highly specific functions — reducing friction and noise, protecting against wear and corrosion, maintaining performance across temperature changes, and providing compatibility with plastics, elastomers and electrical components.
PSC's LUBCHEM automotive material documents products across numerous vehicle components for OEM and industrial applications. One vehicle. Dozens of different lubrication requirements.
Application Areas
One vehicle.
Dozens of different
lubrication
requirements.Automotive grease selection
begins with the component.
Automotive Enquiry
Vehicle platform
Material pair
Temperature range
Current grease
CV Joints, Driveline & Suspension
Lubrication Under Movement, Load and Shock
Documented Applications — Source: Lubchem Automotive Literature
| Component | Application | LUBCHEM |
|---|---|---|
| CV Joint | Articulation, torque transmission, repeated movement | CV 3031 C |
| Spline Shaft | Spline shaft applications | UJ 6032 |
| Suspension component | Suspension applications | LM 8021 |
| Shock Absorber | Shock absorber applications | TB 2051 |
Automotive grease selection begins with the component
Component manufacturer, vehicle platform, material pair, temperature range and current grease should be confirmed before lubricant selection.
Component Review — Send PSC
Material pair / Temperature range
Current grease / Fill quantity
Noise or wear issue
CV 3031 C
CV Joint Grease
UJ 6032
Spline Shaft
LM 8021
Suspension
TB 2051
Shock Absorber
Wheel Bearings, Hubs & Rotating Components
Reliability at the Wheel End
Wheel End
| Component | LUBCHEM |
|---|---|
| Wheel bearing / hub applications | SB 6042 |
Wheel bearing demands: Load → Speed → Temperature → Water → Seal compatibility → Grease life
Auxiliary Rotating Components
| Component | LUBCHEM |
|---|---|
| Belt tensioner / clutch-release bearing | TP 3022 |
| Alternator bearing | TP 3033 G |
| Starter motor | RG 6021 M |
Product Enquiry
Looking for an existing Lubchem automotive grade in India? Send PSC the exact product code.
SB 6042
Wheel Bearing / Hub
TP 3022
Belt Tensioner
TP 3033 G
Alternator Bearing
RG 6021 M
Starter Motor
Brake Systems
Lubrication Where Control Matters
Brake system lubrication applies only to specific mechanical points — guide/sliding points, actuation components and related mechanisms. Lubricants must never be applied indiscriminately to brake assemblies. Product selection and application point must be confirmed for the specific component.
Documented Applications — Source: Lubchem Automotive Literature
| Component | Application | LUBCHEM |
|---|---|---|
| Disk-brake related applications | Disc brake | BP 3091 |
| Clutch master/slave cylinder | Clutch actuation | BS 6070 |
| Brake mechanism / guide / sliding points | — | Application review required — confirm component |
Important
Lubricants must never be applied indiscriminately to brake assemblies. Product selection and application point must be confirmed for the specific component before use.
BP 3091
Disc Brake Applications
BS 6070
Clutch Master / Slave Cylinder
Brake lubrication
is precise.Wrong product.
Wrong point.
Unacceptable.
Always confirm the application point before selecting a product for any brake system component.
Clutch, Transmission & Flywheel
Controlled Movement Across the Powertrain
Documented Applications — Source: Lubchem Automotive Literature
| Component | LUBCHEM |
|---|---|
| Dual-mass flywheel applications | DF 6172 |
| Spline joint applications | BH 6061 |
| Clutch-release bearing | TP 3022 |
| Clutch mechanisms | Application review required |
| Transmission mechanisms | Application review required |
| Gearshift mechanisms | Application review required |
Lifetime vs maintenance lubrication
Lifetime lubrication requires a different application conversation from routine maintenance lubrication. Component manufacturer, transmission type, plastic/metal/elastomer contacts and required service life all need to be established before grade selection.
Application Review Panel
Component manufacturer?
Plastic / metal / elastomer contact?
Required lifetime? · Temperature?
Current lubricant?
DF 6172
Dual-Mass Flywheel
BH 6061
Spline Joint
TP 3022
Clutch-Release Bearing
Lifetime lubrication.
Different conversation.Tell us the required
service life before
selecting a grade.
Electric Motors, Alternators & Electrical Components
Small Components. Long Service Expectations.
Documented Applications — Source: Lubchem Automotive Literature
| Component | LUBCHEM |
|---|---|
| Alternator bearing applications | TP 3033 G |
| Starter motor applications | RG 6021 M |
| Fan bearing applications | SG 6082 |
| Water pump applications | BP 4032 |
Engineering checklist
TP 3033 G
Alternator Bearing
RG 6021 M
Starter Motor
SG 6082
Fan Bearing
BP 4032
Water Pump
Electrical Component Review
Bearing size · Temp
Expected service life
Plastic Gears & Actuators
Lubrication Beyond Metal-on-Metal
Plastic gear and actuator applications require a different selection approach from conventional metal-on-metal lubrication. Plastic compatibility, low friction, noise performance, temperature stability and material pairing must all be considered.
Documented Applications — Source: Lubchem Automotive Literature
| Component | LUBCHEM |
|---|---|
| Plastic gear / automotive actuator | GA 6521 F |
| Gear actuators / precision gear mechanisms | GA 6462 MF |
What plastic is the gear?
PA · POM · PBT · PC · Other. Tell PSC the material pair before selecting the grease. This is far more useful than a generic "plastic-compatible grease" enquiry.
Plastic Gear Review — Send PSC
Speed · Load · Temperature
Current lubricant · Required life
GA 6521 F
Plastic Gear / Actuator
GA 6462 MF
Precision Gear Mechanism
Material pair
comes first.Tell us what
the gear is made of.
PA · POM · PBT · PC — each can respond differently to a lubricant. Confirm the material before selecting the grade.
Window, Sunroof, Seat & Body Mechanisms
The Lubricants Drivers Never See
Documented Application — Source: Lubchem Automotive Literature
| Component | LUBCHEM |
|---|---|
| Automotive window module | WR 6072 F |
| Window lifters / sunroof mechanisms | Application review required — confirm component |
| Seat mechanisms | Application review required |
| Seat-belt mechanisms | Application review required |
| Door locks / hinges | Application review required |
WR 6072 F is the documented Lubchem product for automotive window module applications. Other body mechanism applications require application review with PSC.
Properties typically prioritised
WR 6072 F
Automotive Window Module
Smooth. Quiet.
Long life.The three priorities
of body-mechanism
lubrication.
Product Enquiry — India
LUBCHEM WR 6072 F
Send quantity + delivery location to PSC
PFPE & Specialty Automotive Lubrication
When Conventional Grease Is Not Enough
PFPE-based lubricants may be considered where applications require combinations such as very wide temperature capability, chemical resistance, material compatibility requirements, or long lubricant life. They are not automatically superior or necessary.
PF 8022
PFPE / PTFE Specialty Grease
Use the most appropriate lubricant — not the most expensive
PSC will first review whether the operating conditions actually require PFPE chemistry or whether another Lubchem grade is appropriate. Conventional mineral or synthetic lubricants remain suitable for the vast majority of applications.
PFPE Application Review
Speed / load / water exposure
Material compatibility requirement
Expected lubricant life
Current lubricant
Use the most
appropriate
lubricant.Not the most
expensive one.
PFPE chemistry is justified by operating conditions — not by application difficulty. PSC will review whether the application actually needs it.
See also: PFPE specialty industrial → PF 8092 MS · Page 45
LUBCHEM Automotive Quick Reference
| Component / Application | LUBCHEM Product |
|---|---|
| CV joint | CV 3031 C |
| Shock absorber | TB 2051 |
| Spline shaft | UJ 6032 |
| Suspension component | LM 8021 |
| Wheel bearing / hub | SB 6042 |
| Belt tensioner / clutch-release bearing | TP 3022 |
| Alternator bearing | TP 3033 G |
| Starter motor | RG 6021 M |
| Fan bearing | SG 6082 |
| Water pump | BP 4032 |
| Disc brake related | BP 3091 |
| Clutch master/slave cylinder | BS 6070 |
| Spline joint | BH 6061 |
| Dual-mass flywheel | DF 6172 |
| Automotive window module | WR 6072 F |
| Plastic gear / actuator | GA 6521 F |
| Precision gear actuator | GA 6462 MF |
| Specialty PFPE application | PF 8022 |
Automotive Component Manufacturer?
PSC invites enquiries from Tier-1 / Tier-2 component manufacturers, Korean / Japanese / European equipment users, bearing manufacturers, motor and actuator manufacturers, window and seat-system manufacturers, brake / clutch component manufacturers.
Already specified LUBCHEM?
Product code + Pack size
Annual requirement
Delivery location
New component application?
Drawing/photo + materials
Speed/load + temperature
Current lubricant + required life
Specialty Lubrication From Fibre to Finished Fabric
Lubchem's textile guide separates lubrication by actual machine and component — spinning machines, synthetic-fibre production, twisting/winding, weaving, finishing and stenter frames. Speed and temperature can change the lubricant requirement completely.
Operating challenges
Speed and
temperature
change the
requirement
completely.Select by machine.
Not by industry.
Textile Enquiry
Component · Speed / RPM
Temperature · Existing lubricant
Problem
Carding & Drawing
Lubrication at the Beginning of the Spinning Process
Documented Applications — Source: Lubchem Textile Application Guide
| Machine | Lubrication Point | LUBCHEM |
|---|---|---|
| Carder & Drawing Frame | Rotary plate / plain bearings | DF 6102 |
| Drawing Frame | Top and bottom roller bearings | BL 6012 |
Source: Lubchem Korea textile application guide. Product codes appear against specific lubrication points as documented in that source.
Application checklist
Application Review
Send PSC the machine make and lubrication point
DF 6102
Carder / Drawing Frame
BL 6012
Drawing Frame Roller
Fibre contamination
is the dominant
challenge here.Retention matters
as much as
performance.
Ring & Open-End Spinning
When Bearing Speed Becomes Critical
As rotational speed increases, lubricant selection becomes increasingly sensitive to viscosity and grease behaviour. Higher speed means higher frictional heat and a smaller margin for lubricant degradation.
Documented Applications — Source: Lubchem Textile Application Guide
| Machine | Application | LUBCHEM |
|---|---|---|
| Ring-spinning frame | Roller bearing applications | PH 4101 |
| Open-end spinning turbines | High-speed applications | PH 4012 |
Source: Lubchem Korea textile application guide.
High-speed bearing review
Do not make a generic high-speed grease recommendation without these details: Machine / Spindle or rotor speed / Bearing / Existing grease / Bearing temperature / Relubrication interval
PH 4101
Ring-Spinning Frame
PH 4012
Open-End Spinning / High-Speed
RPM ↑
Heat ↑Selection becomes
increasingly
speed-sensitive.
Send PSC the spindle or rotor speed before selecting a high-speed bearing grease.
Synthetic Fibre & Godet Systems
Precision Lubrication in Fibre Production
Lubchem's textile documentation contains a dedicated synthetic-fibre spinning section, including lubrication of high-speed rotating elements. Godet lubrication must consider speed, bearing temperature, heat transfer, grease life, lubricant migration and potential contamination of fibre.
Documented Applications — Source: Lubchem Textile Application Guide
| Application | LUBCHEM |
|---|---|
| Godet / high-speed bearing applications | HL 3091 |
| Specialty high-temperature / demanding bearing applications (where documented) | PF 8092 |
A lubricant failure can become a product-quality problem
In synthetic fibre production, lubricant migration or degradation at a godet bearing is not only a maintenance problem — it can affect the fibre being produced. Speed, bearing temperature and heat transfer are critical selection inputs.
HL 3091
Godet / High-Speed Bearing
PF 8092
Specialty / High-Temperature Bearing
A lubricant failure
here is not just
a bearing failure.It can become
a product-quality
problem.
Godet Review
Heat transfer arrangement
Current grease · Fibre type
Twisting & Winding
Repeated Motion at Production Speed
Winding and twisting machinery involves both rotating and reciprocating mechanisms on the same machine. These two types of motion often require different lubricant characteristics.
Documented Application — Source: Lubchem Textile Application Guide
| Component | Application | LUBCHEM |
|---|---|---|
| Thread-guide / winding | Sliding elements — thread-guide slides and zig-zag winding guides | MP 6202 CR |
Rotating components (bearings, rollers, spindles) and reciprocating components (guides, slides, traversing mechanisms) on the same machine can require different lubricant characteristics. Review each zone separately.
Rotating.
Reciprocating.Same machine.
Different lubricant
requirements.
A winding machine may need different lubricants for its bearings and its thread-guide slides. Review each zone separately.
MP 6202 CR
Thread-Guide / Winding Guide
Application Information
Material pair · Cycle rate
Temperature · Current lubricant
Two zones. Two reviews.
Confirm rotating and reciprocating lubrication points separately when reviewing winding machinery.
Weaving Machinery
Speed, Impact and Repetitive Motion
Weaving machinery combines repetitive mechanical movement with fibre contamination and long production cycles. Lubrication requirements differ by component zone.
Lubrication Zones
| Zone | LUBCHEM |
|---|---|
| Bearings | Application review required |
| Gears | Application review required |
| Guides | Application review required |
| Cams | Application review required |
| Reciprocating mechanisms | Application review required |
| Electric motors | Application review required |
Where the Lubchem textile application table gives an explicit grade, it appears here. Where it does not, PSC will conduct an application review. Populating a product code for every zone without verified documentation would undermine the technical credibility of this guide.
Application review is the answer, not a limitation
A correct application review will identify the right Lubchem product for each zone. An incorrect product code causes more problems than no product code.
Six zones.
Six separate
lubrication
reviews.Not one product
for all of them.
Weaving Machine Review
Loom type
Component zone
Current lubricant
Operating problem
Application Review
Send PSC the machine make and lubrication point
Wet Processing & Textile Finishing
Lubrication Around Water, Chemicals and Heat
Wet processing introduces a fundamentally different lubrication environment from spinning. Water, process chemicals and heat replace the speed-and-contamination challenge of the spinning zone.
Documented Application — Source: Lubchem Textile Application Guide
| Process | Application | LUBCHEM |
|---|---|---|
| Washing / Mercerising / Dyeing / Festoon steamer | Bearing applications | PH 4052 |
Source: Lubchem Korea textile application guide.
What changes in wet processing
Send PSC the process chemistry as well as the bearing details
The process chemical environment can influence lubricant compatibility. A bearing in a dyeing machine may face different chemical exposure from a bearing in a washing machine on the same line.
PH 4052
Wet Processing / Finishing Bearings
Spinning:
speed and fibre.
Wet processing:
water, chemicals
and heat.Different environment.
Different lubricant.
Wet Processing Review
Bearing details
Temperature · Current lubricant
Stenter Chains
High-Temperature Lubrication for Textile Finishing Equipment
Stenter chain lubrication is a specialist application within textile finishing. Lubchem's textile range includes dedicated chain lubricants for high-temperature textile finishing equipment. The exact grade should be selected against operating conditions rather than treated as interchangeable products.
Documented Stenter Chain Products — Source: Lubchem Textile Application Guide
| Product | Application |
|---|---|
| CH 260 | Textile chain lubrication |
| CM 320 | Textile chain lubrication |
| CH 320 SUPER | Stenter chain |
| CH 320 SUPER (N) V | Stenter chain |
Grade selection requires operating condition review. These products are not interchangeable without application review.
Selection questions
Using a different
stenter chain oil?Send PSC the current
product name and
operating temperature.
We can review the application against the appropriate Lubchem product.
Stenter Chain Review
Send PSC: current product + chain temperature + oven temperature
CH / CM Series
Four documented products in the stenter / high-temperature chain family. Grade selected by operating temperature, system type and current lubricant profile.
Textile Electric Motors & Auxiliary Equipment
The Equipment Around the Textile Machine Matters Too
Lubchem's textile material covers lubrication of electric motors and auxiliary equipment beyond the direct fibre-processing components. However, a product documented for a textile-machine motor should not automatically be assumed suitable for every motor bearing without reviewing speed, bearing size, temperature, grease fill, seal arrangement and relubrication practice.
Documented Applications — Source: Lubchem Textile Application Guide
| Component | LUBCHEM |
|---|---|
| Electric motor bearing applications | HL 3032 L |
| Electric motor / related bearing applications | HL 3043 |
Common auxiliary areas
Selection parameters for electric motor bearings
RPM · Bearing size · Temperature · Grease fill · Seal / shield arrangement · Relubrication practice. Review each motor separately — do not assume one product covers all textile plant motors.
HL 3032 L
Electric Motor Bearing
HL 3043
Electric Motor / Related Bearing
One plant.
Many motors.Review each
bearing
separately.
Speed, bearing size, temperature and seal arrangement vary even between motors on the same production line.
Motor Bearing Review
Temperature · Seal type
Current grease · Relubrication interval
LUBCHEM Textile Quick Reference
| Machine / Component | LUBCHEM Product |
|---|---|
| Carder / drawing-frame rotary plate & plain bearings | DF 6102 |
| Drawing-frame top / bottom roller bearings | BL 6012 |
| Ring-spinning-frame roller bearings | PH 4101 |
| Open-end spinning turbines / high-speed applications | PH 4012 |
| Godet / high-speed bearing applications | HL 3091 |
| Specialty godet / bearing applications | PF 8092 |
| Thread-guide / zig-zag winding slides | MP 6202 CR |
| Wet processing / finishing bearings (washing / mercerising / dyeing / festoon steamer) | PH 4052 |
| Stenter / high-temperature chain applications | CH / CM Series |
| Electric motor bearing applications | HL 3032 L / HL 3043 |
Already using LUBCHEM?
You don't need to send us the machine history.
Send: Product code → Quantity → Pack size → Delivery location
Solving a textile lubrication problem?
Send: Machine manufacturer → Model → Component → Speed / RPM → Temperature → Existing lubricant → Problem
Hyper Compressors / LDPE
Specialty Lubrication for Hyper Compressors
High-pressure LDPE compressor lubrication is a specialist application where lubricant selection involves much more than viscosity. Lubchem's documentation provides verified technical data for dedicated compressor grades.
Documented Grade — Source: Lubchem Compressor Application Literature
PE 270
Hyper Compressor Lubricant
Technical data from Lubchem compressor application documentation. PE 270 is a documented Lubchem hyper-compressor lubricant, not a generic compressor oil.
Position correctly
PE 270 is documented for hyper-compressor / LDPE applications. Do not position as a generic compressor oil. Application review is required before specifying.
High pressure.
LDPE.
Specialist
application.More than viscosity.
LDPE hyper-compressor lubrication involves selection criteria beyond a standard viscosity match. Send PSC the compressor details before specifying.
What PSC Needs
Stage
Existing lubricant
Consumption
Operating conditions
HC 220 W & Pumpability
Compressor Lubrication Supported by Test Data
HC 220 W
Compressor Lubricant
Technical data from Lubchem compressor application documentation.
Pumpability tested
Lubchem's compressor documentation includes Burckhardt Compression pumpability test results for HC 220 W, including tests at 164 rpm and 250 rpm (October 2017 documentation). This confirms that pumpability data is available — it does not by itself constitute a Burckhardt OEM approval.
Compressor Review
Existing lubricant · Stage
Consumption · Operating conditions
Pumpability
tested.Burckhardt
Compression
test data
available.
Lubchem documentation includes pumpability test results for HC 220 W. Contact PSC for details. This does not constitute OEM approval.
Important
Pumpability test results support technical evaluation. Final approval and use must be confirmed against the specific compressor OEM's requirements and current approval documentation.
Robotics & Automation
Specialty Lubrication for Precision Motion
Robotics and precision automation represent a growing Indian market for specialty lubricants. Three engineering requirements — precision motion, low wear and long-life lubrication — drive product selection in this area.
Documented Applications — Source: Lubchem Industrial Application Literature
| Component | Application | LUBCHEM |
|---|---|---|
| Robot reducer | Robot reducer applications | RB 6020 M |
| Gear actuators / precision gear mechanisms | Precision gear mechanism | GA 6462 MF |
| Plastic gears & actuators | Plastic gear / actuator | GA 6521 F |
Robot / Automation Review — Send PSC
Reducer manufacturer
Gear type · Speed · Load
Temperature
Existing grease
Korean equipment installed in India?
Send PSC the OEM + model + existing Lubchem code. This directly supports sourcing continuity for Korean-manufactured equipment operating in India.
RB 6020 M
Robot Reducer
GA 6462 MF
Precision Gear Mechanism
GA 6521 F
Plastic Gear / Actuator
Korean robot.
Indian plant.Send PSC
the OEM + existing
Lubchem code.
Machine Tools & High-Speed Spindles
When Speed Changes Everything
High-speed spindle lubricant selection must consider RPM / DN value, bearing type, preload, temperature, lubricant quantity, grease migration and required service life. Each factor can change the selection independently.
Documented Application — Source: Lubchem Industrial Application Literature
SPO 2
High-Speed Spindle Bearing
More grease is not necessarily better at high speed
Overfilling a high-speed spindle bearing causes heat generation, not better lubrication. Grease quantity is as important as grease chemistry at high DN values.
Spindle Review — Send PSC
Bearing type
Maximum RPM
Existing lubricant
More grease
is not better
at high speed.Quantity matters
as much as
chemistry.
Selection inputs required
PFPE / Extreme-Temperature Specialty Lubricants
For Applications Beyond Conventional Lubricant Chemistry
Conventional mineral and synthetic lubricants are suitable for enormous numbers of applications. PFPE chemistry becomes relevant where requirements such as extreme temperature range, chemical resistance, long life or specific material compatibility justify it. PFPE should not be specified simply because an application is difficult.
PF 8092 MS
PFPE / PTFE Specialty Grease
NSF H1 food-grade use is applicable only where supported by the applicable documentation for the specific product lot. Verify with PSC before food-contact application.
Don't specify PFPE just because the application is difficult
PSC should first review whether the operating conditions actually require PFPE chemistry or whether a standard Lubchem grade is appropriate. The PFPE question begins with operating temperature, chemical environment, material compatibility and required service life.
Extreme
temperature.
Chemical
resistance.
Long life.PFPE where
conditions justify it.
Not before.
PFPE Application Review
Chemical environment
Material compatibility requirement
Required lubricant life
Current lubricant
See also: Automotive PFPE → PF 8022 · Page 29
High-Temperature Applications
"High Temperature" Is Not a Lubricant Specification
A customer saying "I need a 200°C grease" has given us only one piece of information. Temperature is the starting point — not the selection criterion.
What PSC still needs
Lubchem technologies encountered in this guide — high-temperature relevant
| Product / Family | Context |
|---|---|
| HB Series | Selected industrial / high-temperature bearing applications |
| PH Series | Selected high-speed applications |
| CH / CM Series | Textile high-temperature chain oils |
| PF Series | Specialty PFPE applications |
| HM 9059 GM | Riding-ring / kiln tyre application |
"High
temperature"
is not a
lubricant
specification.Same temperature.
Different machine.
Different lubricant.
Temperature is the start of the conversation
A bearing running at 160°C in a continuous caster presents a very different lubrication challenge from a bearing at the same temperature in a stenter frame or a kiln-riding-ring interface. Machine, speed, water exposure and lubrication method all change the selection.
Already Know the LUBCHEM Product Code?
We don't need
a long technical
enquiry.
Send PSC
LUBCHEM Product Code
Pack Size
Quantity
Delivery Location
Required Date
Examples
Project Sales Corp
LUBCHEM Korea — India Enquiries
projectsalescorp.com
pscspecialtylubricants.com
QR CODE
PLACEHOLDER
Product Index
LUBCHEM Product Code → Principal documented application → Page
| Product Code | Principal Documented Application | Industry | Page |
|---|---|---|---|
| BE 2102 G | Heavy-load bearings / work-roll / slew applications | Steel | 4, 8, 10 |
| BE 2181 | Grinding mill / sinter trolley bearings | Steel | 4, 5, 10 |
| BE 6181 MG | Heavy-load cement-industry applications | Cement | 12, 18, 20 |
| BH 6042 | High-speed bearing applications (coke oven) | Steel | 5, 10 |
| BH 6061 | Spline joint applications | Automotive | 25, 30 |
| BL 6012 | Drawing-frame top/bottom roller bearings | Textile | 32, 40 |
| BP 3091 | Disc-brake related applications | Automotive | 24, 30 |
| BP 4032 | Water pump applications | Automotive | 26, 30 |
| BS 6070 | Clutch master/slave cylinder | Automotive | 24, 30 |
| CH 260 | Textile chain lubrication | Textile | 38, 40 |
| CH 320 SUPER | Stenter chain | Textile | 38, 40 |
| CH 320 SUPER (N) V | Stenter chain | Textile | 38, 40 |
| CM 320 | Textile chain lubrication | Textile | 38, 40 |
| CV 3031 C | CV joint applications | Automotive | 22, 30 |
| DF 6102 | Carder / drawing frame plain bearings | Textile | 32, 40 |
| DF 6172 | Dual-mass flywheel applications | Automotive | 25, 30 |
| EO 2100 GC | Operational open-gear lubrication | Cement / Steel | 14, 15, 19 |
| EO 2100 G | Sinter rotary-mixer open gear | Steel | 5, 10 |
| EO 2101 GA | Open-gear priming / preparation | Cement | 14, 15, 19, 20 |
| EO 2107 G | Pusher/guide rack rail | Steel | 5, 10 |
| EO 2107 GB | Running-in / corrective open gears | Cement | 14, 15, 19, 20 |
| EO 210 G Series | Rotary-kiln / grinding-mill open gears | Steel / Cement | 4, 5, 10 |
| GA 6462 MF | Precision gear actuator / robotics | Automotive / Ind. | 27, 30, 43 |
| GA 6521 F | Plastic gear / automotive actuator | Automotive / Ind. | 27, 30, 43 |
| HB 3101 EP | Conveyor bearings / coke-oven gas valve | Steel | 4, 5, 10 |
| HB 3101 P | Continuous casting / vibrating screen | Steel | 5, 7, 10 |
| HB 3101 S | High-temperature bearing applications | Steel | 5, 10 |
| HC 220 W | Hyper compressor | Specialist | 42 |
| HL 3032 L | Electric motor bearing applications | Textile | 39, 40 |
| HL 3043 | Electric motor / related bearings | Textile | 39, 40 |
| HL 3091 | Godet / high-speed bearing | Textile | 34, 40 |
| HM 9059 GM | Kiln tyre / internal riding ring | Cement / Steel | 5, 14, 16, 20 |
| HP 3101/2 | Sinter slide tracks | Steel | 5, 10 |
| KR 6102 EP | Pellet-press bearings and gears | Steel | 10 |
| LM 8021 | Suspension component applications | Automotive | 22, 30 |
| MP 6202 CR | Thread-guide / zig-zag winding slides | Textile | 35, 40 |
| PE 270 | Hyper compressor (LDPE) | Specialist | 41 |
| PF 8022 | Specialty PFPE automotive applications | Automotive | 29, 30 |
| PF 8092 / PF 8092 MS | PFPE specialty industrial / textile | Specialist | 34, 40, 45 |
| PH 4012 | Open-end spinning / high-speed | Textile | 33, 40 |
| PH 4052 | Wet processing / finishing bearings | Textile | 37, 40 |
| PH 4101 | Ring-spinning frame roller bearings | Textile | 33, 40 |
| RB 6020 M | Robot reducer applications | Specialist | 43 |
| RG 6021 M | Starter motor applications | Automotive | 23, 26, 30 |
| SB 6042 | Wheel bearing / hub applications | Automotive | 23, 30 |
| SG 6082 | Fan bearing applications | Automotive | 26, 30 |
| SPO 2 | High-speed spindle bearing | Specialist | 44 |
| TB 2051 | Shock absorber applications | Automotive | 22, 30 |
| TP 3022 | Belt tensioner / clutch-release bearing | Automotive | 23, 25, 30 |
| TP 3033 G | Alternator bearing applications | Automotive | 23, 26, 30 |
| UJ 6032 | Spline shaft applications | Automotive | 22, 30 |
| WR 6072 F | Automotive window module | Automotive | 28, 30 |
| WS 3190 M | High-load rotation | Steel | 10 |
Application Index
Machine / Component → Industry → Product or Product Family → Page
| Machine / Component | Industry | LUBCHEM Product | Page |
|---|---|---|---|
| Alternator bearing | Automotive | TP 3033 G | 23, 26 |
| Belt tensioner bearing | Automotive | TP 3022 | 23 |
| Blast furnace equipment | Steel | GM S / GH / HP Series — review | 6 |
| Carding machine | Textile | DF 6102 | 32 |
| Cement girth gear — priming | Cement | EO 2101 GA | 14, 15 |
| Cement girth gear — running-in | Cement | EO 2107 GB | 14, 15 |
| Cement girth gear — operation | Cement | EO 2100 GC | 14, 15 |
| Clutch-release bearing | Automotive | TP 3022 | 23, 25 |
| Continuous caster bearings | Steel | HB 3101 P | 7 |
| Conveyor bearings — steel | Steel | HB 3101 EP | 4 |
| CV joint | Automotive | CV 3031 C | 22 |
| Drawing frame roller bearings | Textile | BL 6012 | 32 |
| Dual-mass flywheel | Automotive | DF 6172 | 25 |
| Fan bearing — automotive | Automotive | SG 6082 | 26 |
| Godet / high-speed bearing | Textile | HL 3091 | 34 |
| Grinding mill bearings | Steel | BE 2181 | 4 |
| Grinding mill open gear | Steel | EO 210 G Series | 4 |
| Hyper compressor — LDPE | Specialist | PE 270 | 41 |
| Hyper compressor — HC | Specialist | HC 220 W | 42 |
| Kiln riding ring / tyre | Cement | HM 9059 GM | 14, 16 |
| Open gear — multiple industries | Multi | EO 2101/2107/2100 G Series | 15, 19 |
| Pellet press | Steel | KR 6102 EP | 10 |
| Plastic gear / actuator | Automotive / Ind. | GA 6521 F | 27, 43 |
| Precision gear mechanism | Automotive / Ind. | GA 6462 MF | 27, 43 |
| Ring-spinning frame bearings | Textile | PH 4101 | 33 |
| Robot reducer | Specialist | RB 6020 M | 43 |
| Roller press / PGR — cement | Cement | BE 6181 MG | 18 |
| Shock absorber | Automotive | TB 2051 | 22 |
| Sinter machine — slide tracks | Steel | HP 3101/2 | 5 |
| Sinter machine — trolley bearings | Steel | BE 2181 | 5 |
| Spindle bearing — high speed | Specialist | SPO 2 | 44 |
| Spline shaft | Automotive | UJ 6032 | 22 |
| Stacker / reclaimer slew bearing | Steel | BE 2102 G | 4 |
| Starter motor | Automotive | RG 6021 M | 23, 26 |
| Stenter chain | Textile | CH / CM Series | 38 |
| Suspension component | Automotive | LM 8021 | 22 |
| Thread-guide / winding slide | Textile | MP 6202 CR | 35 |
| Water pump — automotive | Automotive | BP 4032 | 26 |
| Wet processing bearing | Textile | PH 4052 | 37 |
| Wheel bearing / hub | Automotive | SB 6042 | 23 |
| Window module — automotive | Automotive | WR 6072 F | 28 |
| Work-roll bearing / EP bearing | Steel | BE 2102 G | 8 |
Can't find the machine?
That does not mean Lubchem has no applicable product. Send the application to PSC for review.
Don't start
with the product.
Start with
the machine.
If you know the product
Product Code · Quantity · Delivery Location
If you know the machine
OEM · Model · Lubrication Point · Existing Lubricant
If you only know the problem
Send us a photograph
SHOW US THE APPLICATION.
pscspecialtylubricants.com
Product recommendations are subject to application review. Equipment and manufacturer names, where referenced, identify applications only and do not imply OEM approval unless expressly documented. Source: LUBCHEM Korea application literature and PSC technical documentation.