Permatex Form-A-Gasket No. 2 Sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.

Typical Appilications :

• Valve cover gaskets
• Oil pan gaskets
• Threaded connections
• Cover plates
• Hose connections

Available in 11 oz tube.

Dynatex Blue RTV Gasket Maker Temperature resistant up to 500 °F (260 °C). Resists oil, water, anti-freeze and transmissions fluid. For valve covers, oil pans, transmission pans, rear-end housings, timing chain covers, thermostat housings, water pumps and oil pump flanges. Withstands the harsh conditions of Gear Oil, especially with differentials and transfer cases.

Product Benifits :

• Improves reliability
• Extends gasket life
• Stops leakage
• Excellent for metal to metal assemblies
• Slow drying
• Flexible setting

1. Remove all previous material from mating surfaces. Permatex Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
2. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.
3. Remove cap, puncture tube or cartridge seal and attach extension nozzle (if provided).
4. When used as a gasket dressing, spread product with a spatula to a uniform film on one side of gasket and then position it on the assembly. Coat the second side of gasket and re-assemble. Slower drying formula increases work time.
5. Assembly is operational after 4 hours, full cure is
   affected after 24 hours.